Owners Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Panel Descriptions
- Basic Operations
- Video Input/Output Settings
- Video Operations
- Video Composition Operations
- Audio Operations
- Adjusting the Volume Level
- Outputting AUX-bus Audio
- Applying Effects to Audio
- Controlling Volume Levels Automatically (Auto Mixing)
- Muting Out Specific Input Audio (Mute)
- Interlinking Audio Output to Video Switching (Audio Follow)
- Separating Discrete Analog Input Audio Streams and Adding Them to SDI Video
- Other Features
- Saving/Recalling Settings (Preset Memory)
- Saving the Unit’s Settings on a USB Flash Drive
- Formatting USB Flash Drives
- Returning Settings to the Factory-default State (Factory Reset)
- Preventing Unintended Operation (Panel Lock)
- Operating the V-60HD by Remote Control
- Outputting a Tally Signal
- Using Smart Tally
- Appendices
13
Video Input/Output Settings
Assigning a Video Source to Channel 6
You can assign a video source at the HDMI IN 6 connector or the
RGB/COMPONENT IN 6 connector to channel 6.
You change the setting to match the connected source device.
* By factory default, the setting is for the HDMI IN 6 connector.
1. Select the [MENU] button
0
“VIDEO INPUT”
0
“HDMI/RGB
IN 6”
0
“INPUT 6 ASSIGN.”
2. Use the [VALUE] knob to specify the input connector to
assign to channel 6.
Value Explanation
HDMI Video is input via the HDMI IN 6 connector.
RGB/COMPONENT
Video is input via the RGB/COMPONENT IN 6
connector.
3. Press the [VALUE] knob to apply the setting.
4. Press the [MENU] button to quit the menu.
Adjusting Output Video
You can adjust the output video to match the equipment receiving
the output from the V-60HD.
MEMO
You can output a test pattern, useful for adjusting the image
quality of a display. You use the [MENU] button
0
“SYSTEM”
0
“TEST PATTERN” to specify the test pattern.
1. Select the [MENU] button
0
“VIDEO OUTPUT”
0
the output
video.
A menu for the selected output video appears.
2. Select a menu item, then use the [VALUE] knob to adjust the
output video.
SDI OUT 1 and 2: SDI OUT 1 and 2 connectors
Menu item Explanation
3G-SDI MAPPING
This sets the mapping structure for 3G-SDI
output.
H FLIP
Setting this to “ON” ips the output video
horizontally.
BRIGHTNESS This adjusts the brightness.
CONTRAST This adjusts the contrast.
SATURATION This adjusts the saturation.
HDMI OUT 1 and 2: HDMI OUT 1 and 2 connectors
HDMI MULTI-VIEW: MULTI-VIEW connector
Menu item Explanation
COLOR SPACE
This sets the color space (system for
representing colors in video).
DVI-D/HDMI SIGNAL This sets the output mode for HDMI output.
H FLIP (*1)
Setting this to “ON” ips the output video
horizontally.
BRIGHTNESS This adjusts the brightness.
CONTRAST This adjusts the contrast.
SATURATION This adjusts the saturation.
RED This adjusts the red level.
GREEN This adjusts the green level.
BLUE This adjusts the blue level.
(*1) HDMI OUT 1 and 2 only
3. Press the [VALUE] knob to apply the setting.
4. Press the [MENU] button to quit the menu.