Owners Manual

18
Video Operations
Switching AUX Output
You can use button operations to directly select the video to send
to the AUX bus.
You can output the video on the AUX bus from SDI OUT connectors
or HDMI OUT connectors. To output the AUX bus, you change the
bus assignments for the respective connectors to “AUX.”
For details, refer to “Changing Output Bus Assignments” (p. 15).
1. Press the [MODE] button to make it light up in green.
Each press of the [MODE] button makes it toggle between lighting
up in blue and in green.
Lit green
The AUX/MEMORY buttons function as AUX-bus selection buttons.
The AUX/MEMORY button currently selected as the video on the
AUX bus lights up in red.
2. Press an AUX/MEMORY button to select the AUX-bus video.
The AUX output is switched.
MEMO
5 To adjust the volume level of audio on the AUX bus, select the
[MENU] button
0
“AUDIO OUTPUT”
0
“AUX”
0
adjust “AUX
LEVEL.”
5 You use channels 7 and 8 to output a still image or a
monochrome picture (background color) (p. 18).
5 On the multi-view monitor, the input channel sent to the AUX
bus is displayed with an “AUX” symbol.
The colors of lighted AUX/MEMORY buttons
When the [MODE] button is lighted in green, the AUX/MEMORY
buttons also function as indicators showing the status of video
input.
AUX/MEMORY [1] through [6] Buttons
Button Input video status
Lighted in green Valid video is input.
Flashing in green
Video whose format diers from the system
format setting is input.
Dark No video is input.
AUX/MEMORY [7] and [8] Buttons
Button Input video status
Lighted in green A still image has been imported.
Dark No still image has been imported.
MEMO
The AUX/MEMORY button for the currently selected video
lights up or ashes in red.
Using Imported Still Images
You can take a still image captured from input video or imported
from a USB ash drive, assign it to channel 7 or 8, and output it
in the same way as video. You can also use it as a source for DSK
compositing (p. 23).
You can save up to two still images in the unit.
* When still images are saved in the unit, startup takes longer
time according to image size and the number of still images
saved.
Capturing a Still Image from Input Video
This captures a still image from input video and saves it in the unit.
NOTE
5 All video input stops during still-image capture.
5 Depending on the format of the input video, completion of
still-image capture might take some time.
5 Created still images cannot be saved to a USB ash drive.
1. Select the [MENU] button
0
“CAPTURE IMAGE”
0
“CAPTURE
SOURCE,” then use the [VALUE] knob to specify the input
video to use for still-image capture.
2. Press the [VALUE] knob to apply the setting.
3. Select “TARGET STORAGE NO,” then use the [VALUE] knob
to select “STILL IMAGE 1” or “STILL IMAGE 2” as the memory
destination for saving the still image.
A “ ” symbol is displayed for memory where a still image is already
saved.
4. Press the [VALUE] knob to apply the setting.
5. Select “CAPTURE EXECUTE.”
A conrmation message appears.
If you want to cancel the operation, press the [EXIT] button.
6. Use the [VALUE] knob to select “YES,” then press the [VALUE]
knob.
Capturing is carried out.
7. Press the [MENU] button to quit the menu.
MEMO
HDCP-applied video on HDMI IN 5 and 6
When you have captured from copyright-protected (HDCP)
video, the created still image is treated the same way as HDCP-
applied video.
The still image is switched between displayed and hidden by
turning HDCP on and o (p. 15).
Note, however, that when HDCP is switched from o to on, the
still image is reloaded from where it’s saved in memory, and so
the still image might take some time to display.