Owners Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Panel Descriptions
- Basic Operations
- Video Input/Output Settings
- Video Operations
- Video Composition Operations
- Audio Operations
- Adjusting the Volume Level
- Outputting AUX-bus Audio
- Applying Effects to Audio
- Controlling Volume Levels Automatically (Auto Mixing)
- Muting Out Specific Input Audio (Mute)
- Interlinking Audio Output to Video Switching (Audio Follow)
- Separating Discrete Analog Input Audio Streams and Adding Them to SDI Video
- Other Features
- Saving/Recalling Settings (Preset Memory)
- Saving the Unit’s Settings on a USB Flash Drive
- Formatting USB Flash Drives
- Returning Settings to the Factory-default State (Factory Reset)
- Preventing Unintended Operation (Panel Lock)
- Operating the V-60HD by Remote Control
- Outputting a Tally Signal
- Using Smart Tally
- Appendices
20
Video Operations
Applying a Fade to PGM/PVW Output
Video (Output Fade)
This performs a fade-out from the output video to a black screen,
or a fade-in from a black screen to the output video.
You can insert a black screen into the output video at times
where you don’t want to output a picture, such as at intervals in
presentations or band performances.
MEMO
Fade-ins and fade-outs are applied to the nal video output
(program output) and the preset video (preview output).
Applying a fade to AUX-bus output is not possible.
1. Press the [OUTPUT FADE] button to perform a fade-out.
During the fade, the [OUTPUT FADE] button ashes.
When the fade-out is complete, the [OUTPUT FADE] button lights
up.
2. To perform a fade-in, press the [OUTPUT FADE] button again.
When the fade-in is complete, the [OUTPUT FADE] button goes
dark.
MEMO
5 The length of the fade-in or fade-out time uses the setting for
length transition time.
5 You can apply a fade-in and fade-out for both video and audio
at the same time. [MENU] button
0
“SYSTEM”
0
set “OUTPUT
FADE TYPE” to “VIDEO & AUDIO.”