Owners Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Panel Descriptions
- Basic Operations
- Video Input/Output Settings
- Video Operations
- Video Composition Operations
- Audio Operations
- Adjusting the Volume Level
- Outputting AUX-bus Audio
- Applying Effects to Audio
- Controlling Volume Levels Automatically (Auto Mixing)
- Muting Out Specific Input Audio (Mute)
- Interlinking Audio Output to Video Switching (Audio Follow)
- Separating Discrete Analog Input Audio Streams and Adding Them to SDI Video
- Other Features
- Saving/Recalling Settings (Preset Memory)
- Saving the Unit’s Settings on a USB Flash Drive
- Formatting USB Flash Drives
- Returning Settings to the Factory-default State (Factory Reset)
- Preventing Unintended Operation (Panel Lock)
- Operating the V-60HD by Remote Control
- Outputting a Tally Signal
- Using Smart Tally
- Appendices
21
This composites video. The V-60HD has three built-in types of composition.
Compositing Using Picture-in-Picture (PinP)
This composites video in an inset screen over a background video. This section describes operations when in the PGM/PST mode (p. 16).
Background videoInset screen
1. Press a cross-point button for the PGM/A bus to select the
video you want to make the background video.
2. Press a cross-point button for the PST/B bus to select the
video you want to make the inset screen.
3. Press the [PinP 1] or [PinP 2] button to turn on video
compositing (making the button light up).
The selected button lights up in green and the inset screen
appears in the PVW section of the multi-view monitor, allowing
you to check the inset screen’s location and size.
At this stage, the nal output has not yet been changed.
4. Use the [H/PGM-CTR] and [V/PST-CTR] knobs to adjust the
display position of the inset screen.
[H/PGM-CTR] knob
This adjusts the inset screen’s display
position horizontally.
[V/PST-CTR] knob
This adjusts the inset screen’s display
position vertically.
5. Press the [AUTO] or [CUT] button.
The inset screen is composited onto the background video and
the result is sent to nal output. The [PinP 1] (or [PinP 2]) button
and the cross-point button for the PST/B bus light up in red.
Pressing the [AUTO] or [CUT] button a second time makes the
inset screen disappear.
MEMO
You can also display or hide the inset screen by operating the
video fader.
6. To turn o video composition, press the lighted [PinP 1] or
[PinP 2] button.
MEMO
The video transition-time setting is applied as the fade time when
you use the [AUTO] button to display or hide the inset screen.
Making detailed settings for the inset screen
You can use the [PinP 1] and [PinP 2] buttons to make settings
for the size and location of individual inset screens, and to make
setting such as for the width of borders added to the inset screens.
Select the [MENU] button
0
“COMPOSITION”
0
“PinP 1” or “PinP 2,”
then make the settings for the menu items shown below.
Menu item Explanation
SIZE
This sets the size.
For the inset screen, you select a horizontal width
of 1/2, 1/3, or 1/4 as the horizontal width of the
background video.
POSITION H
This adjusts the display position in the horizontal
direction.
POSITION V
This adjusts the display position in the vertical
direction.
BORDER COLOR
This species the color of the border.
Setting this to “SOFT EDGE” blurs the edge.
BORDER WIDTH This adjusts the border width.
SHAPE
This species the shape.
SQUARE CIRCLE HEART DIAMOND
ASPECT This species the aspect ratio.
CROPPING H
This adjusts the frame size in the horizontal direction.
CROPPING V
This adjusts the frame size in the vertical direction.
VIEW POSITION H
This adjusts the display position of the video
within the inset screen in the horizontal direction.
VIEW POSITION V
This adjusts the display position of the video
within the inset screen in the vertical direction.
Video Composition Operations
MEMO
You can hold down a cross-point button and turn the
[H/PGM-CTR] knob or [V/PST-CTR] knob as a shortcut for
“CROPPING” or “VIEW POSITION.”