User Manual

15
Video Input/Output Settings
Changing Output Bus Assignments
The V-60HD has three internal output buses (PGM, PVW, and AUX).
You can select which buses to output via the SDI OUT and HDMI
OUT connectors.
1. Select the [MENU] button0“VIDEO OUTPUT”0“SDI OUT 1,”
“SDI OUT 2,” “HDMI OUT 1,” or “HDMI OUT 2”
0“OUTPUT
ASSIGN.”
2. Use the [VALUE] knob to select “PGM,” “PVW,” or “AUX” and
set the assigned output bus.
3. Press the [VALUE] knob to apply the setting.
4. Press the [MENU] button to quit the menu.
MEMO
5 For details about video transitions on the PGM/A bus and
PST/B bus, refer to “Switching Using the PGM/PST Mode” (p. 16)
and “Switching in the A/B Mode” (p. 17).
5 For details about video transitions on the AUX bus, refer to
“Switching AUX Output” (p. 18).
About audio outputs assigned to output buses
Changing an output bus assignment makes the output audio also
change in tandem, according to the assigned bus.
Output bus
assignment
Output audio
PGM, PVW
This groups together all input audio and outputs
it (master out).
AUX This outputs only the audio on the AUX bus.
* The audio of the MULTI-VIEW connector is xed at master out and
cannot be changed.
Inputting Copyright-protected (HDCP)
Video
To input copyright-protected (HDCP) video from a Blu-ray Disc
player or the like, follow the steps described below to change the
“HDCP” setting.
* The V-60HD must be connected to an HDCP compatible display
for HDCP protected video to be connected.
What’s HDCP?
HDCP is copyright-protection technology that prevents unlawful
copying of content by encoding the path when sending digital
signals from a video playback device to a display monitor or
other display equipment.
1. Select the [MENU] button0“SYSTEM”0“HDCP.”
2. Use the [VALUE] knob to set this to “ON.”
Value Explanation
ON
Copyright-protected (HDCP) video can be input. HDCP is
also added to the video that is output.
OFF Copyright-protected (HDCP) video cannot be input.
3. Press the [VALUE] knob to apply the setting.
4. Press the [MENU] button to quit the menu.
Output from connectors
When “HDCP” is set to “ON,” video is output only from the HDMI
OUT and MULTI-VIEW connectors.
No video is output via the SDI OUT connectors.
Operation of the HDCP indicator
The HDCP indicator operates as follows, regardless of input.
Indicator
“HDCP”
setting
Connection status
Lighted ON
An HDCP-compatible device is connected to
the HDMI OUT or MULTI-VIEW connector.
Flashing ON
No HDCP-compatible device is connected to
the HDMI OUT and MULTI-VIEW connectors.
Alternatively, a device that does not support
HDCP is connected.
Dark OFF —