User Manual

19
Video Operations
Importing a Still Image from a USB Flash Drive
This imports into the unit a still image saved on a USB ash drive.
Supported still-image formats and resolutions
Still-image le formats that can be imported are as follows.
Explanation
Format Bitmap (.bmp), 24-bit color, uncompressed
Resolution In conformity with system format (p. 12)
File name
No more than 8 single-byte alphanumeric characters
* Be sure to append the “.bmp” le extension.
Importing a still image
NOTE
5 All video input stops while a still image is being
imported from a USB ash drive.
5 Large-size still-image les might take some time to import.
5 When you’re using a USB ash drive for the rst time, be sure to
format it on the V-60HD (p. 33).
5 Depending on the USB ash drive, recognition of the ash
drive might take some time.
1. Save the still image in the root directory of the USB ash
drive.
2. Connect the USB ash drive containing the saved still image
to the USB MEMORY port.
3. Select the [MENU] button0“USB MEMORY”0“LOAD STILL
IMAGE.”
4. Use the [VALUE] knob to select “STILL IMAGE 1” or “STILL
IMAGE 2” as the memory where the still image is saved.
A “ ” symbol is displayed for memory where a still image is already
saved.
5. Press the [VALUE] knob.
The USB LOAD screen appears. The names of the les on the USB
ash drive are displayed on this screen.
6. Select the still image le you want to import, then press the
[VALUE] knob.
A conrmation message appears.
If you want to cancel the operation, press the [EXIT] button.
7. Use the [VALUE] knob to select “YES,” then press the [VALUE]
knob.
The still image is imported into the unit.
8. Press the [MENU] button to quit the menu.
Assigning Still Images to Channels 7 and 8
This takes a still image that has been captured or imported from a
USB ash drive, and assigns it to channel 7 or 8.
1. Select the [MENU] button0“VIDEO INPUT”0“STILL/BKG
7/8”0“INPUT 7 ASSIGN” or “INPUT 8 ASSIGN.”
2. Use the [VALUE] knob to select the memory where the still
image is saved.
A “ ” symbol is displayed for memory where a still image is already
saved.
3. Press the [VALUE] knob to apply the setting.
4. Press the [MENU] button to quit the menu.
MEMO
Assigning a monochrome picture (background color)
You can also assign a monochrome picture (background color)
to channel 7 or 8.
In step 2, set “INPUT 7 ASSIGN” or “INPUT 8 ASSIGN” to
“BACKGROUND.” Also, use “BACKGROUND COLOR” to specify
the background color.
* The background-color setting is shared by channels 7 and 8.
Deleting a Still Image
This deletes a still image saved in the unit.
1. Select the [MENU] button0“SYSTEM”0“DELETE STILL
IMAGE.”
2. Use the [VALUE] knob to select “STILL IMAGE 1” or “STILL
IMAGE 2” as the memory you want to delete.
A “ ” symbol is displayed for memory where a still image is already
saved.
3. Press the [VALUE] knob.
A conrmation message appears.
If you want to cancel the operation, press the [EXIT] button.
4. Use the [VALUE] knob to select “YES,” then press the [VALUE]
knob.
The still image is deleted.
5. Press the [MENU] button to quit the menu.