User Manual

32
Other Features
Saving the Unit’s Settings on a USB Flash Drive
You can group together the unit’s settings into a single le (*.V06) and save it to a USB ash drive connected to the USB MEMORY port. You can
access the saved le (*.V06) on the USB ash drive and load it into the unit for use when needed.
* When you’re using a USB ash drive for the rst time, be sure to format it on the V-60HD (p. 33).
* Depending on the USB ash drive, recognition of the ash drive might take some time.
Saving a new settings le
1. Select the [MENU] button0“USB MEMORY”0“SAVE AS
PRESET.”
2. With the cursor positioned at “ENTER,” press the [VALUE] knob.
The USB SAVE AS screen is displayed.
3. Enter the le name.
Cursor
File name
1. Use the [VALUE] knob to move the cursor.
Moving the cursor to a location where no character is present
increases the number of characters.
2. Press the [VALUE] knob to highlight the character at the cursor
location.
3. Use the [VALUE] knob to change the character, then press the
[VALUE] knob to accept the change.
5 Pressing the [EXIT] button deletes the character at the cursor
location.
5 You can enter a text string of up to 9 characters in length.
5 The extension of the le name is “V06.”
4. When you nish entering the name, use the [VALUE] knob to
select “SAVE,” then press the [VALUE] knob.
A conrmation message appears.
If you want to cancel the operation, press the [EXIT] button.
5. Use the [VALUE] knob to select “YES,” then press the [VALUE]
knob.
The le (*.V06) is newly saved on the USB ash drive.
6. Press the [MENU] button to quit the menu.
MEMO
Still images (p. 18) are not saved in the le (*.V06).
Overwrite-saving a settings le
1. Select the [MENU] button0“USB MEMORY”0“SAVE
PRESET.”
2. With the cursor positioned at “ENTER,” press the [VALUE] knob.
The USB SAVE screen is displayed.
3. Select the le to overwrite, then press the [VALUE] knob.
A conrmation message appears.
If you want to cancel the operation, press the [EXIT] button.
4. Use the [VALUE] knob to select “YES,” then press the [VALUE]
knob.
The le is saved by overwriting.
5. Press the [MENU] button to quit the menu.
Recalling
This loads settings that are in a preset memory (1 through 8)
saved on a USB ash drive. Loading settings overwrites the preset
memory on the unit.
1. Select the [MENU] button0“USB MEMORY”0“LOAD
PRESET.”
2. With the cursor positioned at “ENTER,” press the [VALUE] knob.
The USB LOAD screen is displayed.
3. Select the le (*.V06) you want to recall, then press the
[VALUE] knob.
A conrmation message appears.
If you want to cancel the operation, press the [EXIT] button.
4. Use the [VALUE] knob to select “YES,” then press the [VALUE]
knob.
The settings are recalled, and the values in the unit’s preset
memories are overwritten.
5. Press the [MENU] button to quit the menu.