Owner`s manual

Before You Begin Playing

Connecting Your Amp, Speakers, or

Headphones

The VK-88 is not equipped with an amplifier or speakers. In order to hear the sound,

you will need to connect audio equipment such as a monitor speaker system or

stereo set, or use headphones.

1 Before making any connections, make sure that all the devices are turned

off.

2 Connect an amp or speakers to the VK-88’s MIX OUTPUT L (MONO)/R

jacks, or connect a pair of headphones to the PHONES jack.

To output the organ and Orchestral Tones sounds separately, connect your amp or

speakers to the ORCHESTRAL TONES OUTPUT jack and ORGAN OUTPUT jack.

fig.01-02

Use audio cables to connect audio equipment, such as an amp or speakers.

NOTE

To prevent malfunction and/

or damage to speakers or other

devices, always turn down the

volume, and turn off the

power on all devices before

making any connections.

Connect to the MIX OUTPUT

(XLR) jack when using XLR-

type cables.

In order to take full advantage

of the VK-88’s performance,

we recommend using a stereo

amp/speaker system. If you

are using a mono system,

make the connections to the

OUTPUT L (MONO) jack.

Audio cables and headphones

are not included. You will

need to provide these

separately.

Audio Set

Powered Amplifier

Mixer

Audio

cable

Monitor

Speaker