Owner`s manual

65
Advanced Use
Settings That Are Saved for
the Entire System
■ Rotary-related Settings
1. [BANK] button and press the ROTARY SOUND [ON]
button.
The indicators of the [1]–[8] buttons ([1]–[7] buttons) will
blink.
2. Press one of the [1]–[8] buttons ([1]–[7] buttons) to
select the parameter that you want to edit.
There are 15 rotary-related parameters. You can select all
of these parameters by controlling the lighted/
extinguished state of the [BANK] button’s indicator.
The following parameters are assigned to each button.
[BANK] button’s indicator extinguished
[BANK] button’s indicator lighted
3. Turn the [VIBRATO AND CHORUS] knob to adjust
the setting.
If you press the VIBRATO AND CHORUS [UPPER]
button, the setting will return to the initial value.
4. If you want to adjust the setting of another parameter,
press the [BANK] button and the appropriate button
from [1] through [8] (from [1] through [7]) to select the
parameter, and turn the [VIBRATO AND CHORUS]
knob to adjust the setting.
When you want to stop editing, press the [H-BAR
MANUAL] button.
5. Press the [WRITE] button to finalize the settings of the
rotary-related parameters.
Parameter settings will be saved.
The indicators for the [1]–[8] buttons light up while the
settings are being saved.
NOTE
Never turn off the power while parameters are being
saved.
Button Parameter Page
[1] ROTARY WOOFER LEVEL p. 66
[2] ROTARY TWEETER LEVEL p. 66
[3] ROTARY WOOFER RISE TIME p. 66
[4] ROTARY TWEETER RISE TIME p. 66
[5] ROTARY WOOFER FALL TIME p. 66
[6] ROTARY TWEETER FALL TIME p. 66
[7] ROTARY WOOFER SPREAD p. 66
[8] ROTARY TWEETER SPREAD p. 66
Button Parameter Page
[1] ROTARY WOOFER SPEED SLOW p. 66
[2] ROTARY TWEETER SPEED SLOW p. 66
[3] ROTARY WOOFER SPEED FAST p. 66
[4] ROTARY TWEETER SPEED FAST p. 66
[5] ROTARY MIC DISTANCE p. 66
[6] ROTARY RANDOMIZE p. 66
[7]
ROTARY INDICATOR SYNC
SOURCE
p. 66