Reference Manual

ManualsBrandsRoland ManualsProduction SwitchersAV Streaming Mixer

Contents

Panel Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Rear Panel/Side Panel (Connecting Your Equipment) . . . . . . 4

Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Turning the Power On/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Operating the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Video Input/Output Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 7

List of Compatible Video Formats . . . . . . . . . . . . . . . . . . . . . . . 7

Setting the Output Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Specifying the Input Format (EDID) . . . . . . . . . . . . . . . . . . . . . 8

Adjusting Output Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Adjusting Input Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Inputting Copy-Protected (HDCP) Video . . . . . . . . . . . . . . . . . 9

Video Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Using Buttons to Switch the Video . . . . . . . . . . . . . . . . . . . . . . 10

Switching the Video Automatically (Auto Switching) . . . . . . 10

Displaying a Combination of Two Videos (Scene) . . . . . . . . . 12

Compositing a Logo or Image (Luminance Key). . . . . . . . . . . 14

Fading-In/Out the Main Output Video . . . . . . . . . . . . . . . . . . . 14

Outputting a Loaded Still Image . . . . . . . . . . . . . . . . . . . . . . . . 15

Audio Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Adjusting the Mic’s Input Gain (Sensitivity). . . . . . . . . . . . . . . 16

Adjusting the Volume Balance. . . . . . . . . . . . . . . . . . . . . . . . . . 16

Reducing Acoustic Feedback (Howling Canceller). . . . . . . . . 17

Changing the Character of a Voice (Voice Changer) . . . . . . . 17

Applying Eects to Input Audio . . . . . . . . . . . . . . . . . . . . . . . . 18

Using an Eect Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Applying Eects to Output Audio. . . . . . . . . . . . . . . . . . . . . . . 20

Correcting a Time Dierence Between Video and Audio

(Delay) . . 20

Silencing Only Specic Audio (Mute) . . . . . . . . . . . . . . . . . . . . 21

Checking a Specic Audio Input (Solo) . . . . . . . . . . . . . . . . . . 21

Interlinking Audio Output to Video Switching

(Audio Follow) . . . . . . 22

Controlling the Volume Automatically (Auto Mixing) . . . . . . 22

Playing Back Music Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Suppressing Echo in a Web Conference System

(Echo Canceller) . . . . . 24

About the AUX Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Live Streaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Outputting Video/Audio to a Computer for Streaming. . . . . 25

Other Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Saving Internal Settings to a USB Flash Drive . . . . . . . . . . . . . 26

Formatting a USB Flash Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Disabling Panel Operations (Panel Lock) . . . . . . . . . . . . . . . . . 27

Returning to the Factory Settings (Factory Reset) . . . . . . . . . 28

Menu List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

VIDEO INPUT Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

VIDEO OUTPUT Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

SCENE Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

TRANSITION Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

KEY Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

AUTO SWITCHING Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

ON AIR Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

AUDIO INPUT Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

AUDIO OUTPUT Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

AUDIO FOLLOWS VIDEO Menu . . . . . . . . . . . . . . . . . . . . . . . . . 37

AUTO MIXING Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

ECHO CANCELLER Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

AUDIO EFFECTS Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

USB MEMORY Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

SYSTEM Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

LEVEL SETUP Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Appendices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Block Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Shortcut List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Reference Manual

Summary of content (48 pages)

PAGE 1
Reference Manual Contents Panel Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Panel/Side Panel (Connecting Your Equipment) . . . . . . . Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turning the Power On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating the Menu . . . . . . . . . . . . . . .
PAGE 2
Panel Description Top Panel MIC 1 jack AUDIO EFFECTS [1]–[4] buttons (p. 17, 19, 23) Connect your mic here. If you connect a condenser mic that requires a phantom power supply, turn the side panel [PHANTOM] switch on. Turn the audio effects on/off. When on, the button is lit. NOTE 55 If you use a gooseneck mic, operating noise might be picked up. 55 Do not connect a mic that supports plug-in power, or the mics that are included with Roland “VP-03” or “JD-Xi.
PAGE 3
Panel Description SETUP area (p. 6) [KEY] button (p. 14) [MENU] button When this is on (lit), the menu appears on the display that’s connected to the MONITOR (MENU) connector. If you’re in a lower level, this button returns to the next higher level. If the highest menu level is shown, this button closes the menu. Turns on/off video compositing using a luminance key. When on (lit), two videos are composited and output.
PAGE 4
Panel Description Rear Panel/Side Panel (Connecting Your Equipment) * To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections. MAIN connector MONITOR (MENU) connector This outputs the result of mixing the video (main video) and audio. Connect it to your projector, display, or video recorder for recording. Connect this to your display to view the menu.
PAGE 5
Panel Description * Do not block the ventilation openings (the slits located on the front and side panels, etc.). If the ventilation openings are blocked, the internal temperatures may rise, causing malfunctions due to excessive heat. VIDEO INPUT 1–3 connectors MIC 2 jack These input video/audio. Connect them to video devices such as a video camera or BD player, or to your computer. Connect your mic here. If you connect a condenser mic that requires a phantom power supply, turn the [PHANTOM] switch on.
PAGE 6
Basic Operations Turning the Power On/Off Operating the Menu * Before turning the unit on/off, always be sure to turn the volume down. Even with the volume turned down, you might hear some sound when switching the unit on/off. However, this is normal and does not indicate a malfunction. Here’s how to access the menu, and make video/audio settings and settings for this unit. The menu is shown on the display that’s connected to the MONITOR (MENU) connector. 1.
PAGE 7
Video Input/Output Settings List of Compatible Video Formats Input video formats Setting the Output Format Here’s how to specify the output format as appropriate for the device that’s connected. Frame rate MAIN/MONITOR (MENU) connectors When set to “59.94 Hz” When set to “50 Hz” 480/59.94i 576/50i 480/59.94p 576/50p 720/59.94p 720/50p 1080/59.94i 1080/50i 1080/59.
PAGE 8
Video Input/Output Settings Specifying the Input Format (EDID) Adjusting Output Video With the factory settings, EDID is set to “DEFAULT” (the unit transmits EDID information for all formats that it is able to input). Change this setting if you want EDID information for a specific input format to be sent to a source device. Here’s how to adjust the output image appropriately for the device that’s receiving the VR-1HD’s output. What is EDID? 1.
PAGE 9
Video Input/Output Settings Adjusting Input Video Inputting Copy-Protected (HDCP) Video Here’s how to adjust the quality and scaling of the video signals that are assigned to the INPUT [1]–[3] buttons. If you want to input HDCP-protected video from a BD player or other device, you can enable HDCP input. 1. [MENU] button0“VIDEO INPUT”0select “INPUT 1”– “INPUT 3.” * If you want to output HDCP-protected video, connect an HDCPcapable display.
PAGE 10
Video Operations Using Buttons to Switch the Video Here’s how to manually switch between the INPUT 1–3 video signals. 1. Press an INPUT [1]–[3] button to select the video. Switching the Video Automatically (Auto Switching) The video of INPUT 1–3 or of scenes (p. 12) can be switched automatically (the auto switching function). You can make operation easier by letting the video switch automatically.
PAGE 11
Video Operations Specifying the operation mode 7 Video follows audio 1. [MENU] button0“AUTO SWITCHING”0select “TYPE.” 7 Auto scan 1. [MENU] button0“AUTO SWITCHING”0select “TYPE.” 2. Turn the [VALUE] knob to select “AUTO SCAN,” and press to confirm. 3. Use the [VALUE] knob to select a menu item. Menu item Explanation Specifies the order in which video signals are shown. SEQUENCE INPUT 1–3 DURATION SCENE A–E DURATION 2. Turn the [VALUE] knob to select “VIDEO FOLLOWS AUDIO,” and press to confirm. 3.
PAGE 12
Video Operations Displaying a Combination of Two Videos (Scene) You can register a configuration of screens as a “scene” and show a combination of two videos. If you register your favorite configurations as scenes, you can instantly switch between those configurations just by pressing SCENE buttons. The VR-1HD provides five scenes.
PAGE 13
Video Operations 7 Split Copying a scene 1. [SCENE EDIT] button0“SCENE A”–“SCENE E”0select “TYPE.” Here’s how to copy the settings registered in a scene to another scene. 1. [SCENE EDIT] button0select “COPY.” Shows the type of screen configuration that is currently registered. The SCENE COPY menu appears. 2. Turn the [VALUE] knob to select “SPLIT,” and press to confirm. 3. Use the [VALUE] knob to select a menu item. Menu item Explanation AA AA BB PATTERN V.
PAGE 14
Video Operations Compositing a Logo or Image (Luminance Key) Black or white portions of a logo or image can be cut out based on their brightness, and overlaid onto a background video. You can also use a scene (p. 12) as the background video. Logo or image to be overlaid Background video Fading-In/Out the Main Output Video Here’s how to perform a fade-out from the main output video to a black screen, or a fade-in from a black screen to the main output video.
PAGE 15
Video Operations Outputting a Loaded Still Image A still image that you loaded from a USB flash drive can be output in the same way as a video. You can also use it as a source for key compositing (p. 14). NOTE 5 Up to two still images can be temporarily saved in this unit’s internal memory. When you turn off the power, the still images are deleted. 5 When using a USB flash drive for the first time, you must format it using the VR-1HD (p. 27).
PAGE 16
Audio Operations Adjusting the Mic’s Input Gain (Sensitivity) Here’s how to adjust the input gain so that the mic audio is at the appropriate level. 1. Move the [MIC 1] or [MIC 2] fader whose input gain you want to adjust to the “bold line” (0 dB). Adjusting the Volume Balance Here’s how to adjust the volume balance of each input and the overall volume. Indicator (0 dB) 1. Move the [MAIN] knob to a position near the indicator (0 dB). 2.
PAGE 17
Audio Operations Reducing Acoustic Feedback (Howling Canceller) Changing the Character of a Voice (Voice Changer) Here’s how to reduce the acoustic feedback that can occur when a mic is brought near a speaker (howling canceller function). Here’s how to modify the pitch or character of the voice that’s input from a mic. You can create transformations such as “from a female to a male voice,” “from a male to a female voice,” or “robot voice.” 1.
PAGE 18
Audio Operations Applying Effects to Input Audio You can apply effects to the input audio to adjust the character of the sound. The following table shows the effects that are available. Effect Input audio Reverb Gate Compressor Limiter Equalizer High-pass filter ( ( ( ( ( ( ( — — — — — — — — — — — — — — — — — — — — MIC 1, 2 ( LINE ( VIDEO INPUT ( USB ( Music files (p. 23) MEMO 5 You can use effect presets for MIC 1 and MIC 2.
PAGE 19
Audio Operations Reverb (REVERB) This adds reverberation to the sound. Using an Effect Preset 1. [MENU] button0“AUDIO INPUT”0“MIC 1”–“PLAYBACK The VR-1HD provides effect presets for the mics. Simply by selecting a preset, you can easily apply the effect that’s appropriate for your situation. 2. Turn the [VALUE] knob to adjust the amount of sound Each preset consists of a combination of two effects (equalizer, high-pass filter). (BGM/SE)”0select “REVERB SEND.
PAGE 20
Audio Operations Applying Effects to Output Audio Here’s how to modify the tonal character by applying effects to the audio output. 1. [MENU] button0“AUDIO OUTPUT”0“MAIN BUS” or “AUX BUS”0select an effect menu item. Correcting a Time Difference Between Video and Audio (Delay) If there is a timing discrepancy between the video and audio, you can correct the output timing by delaying the audio output. 1. [MENU] button0“AUDIO INPUT”0“MIC 1”–“USB FROM PC”0select “DELAY.
PAGE 21
Audio Operations Silencing Only Specific Audio (Mute) Checking a Specific Audio Input (Solo) Here’s how to temporarily silence specific input audio or output audio (the mute function). Here’s how you can temporarily monitor a specific audio input via the headphones (solo function). Muting input audio 1. [MENU] button0“AUDIO INPUT”0“MIC 1”–“PLAYBACK (BGM/SE)”0select “MUTE.” 2. Turn the [VALUE] knob to select “ON,” and press to confirm. 3. Press the [MENU] button several times to close the menu.
PAGE 22
Audio Operations Interlinking Audio Output to Video Switching (Audio Follow) Controlling the Volume Automatically (Auto Mixing) Here’s how the audio output can be automatically switched in tandem with video switching (the audio follow function). The volume adjustments that would normally be done by the operator can be controlled automatically (auto mixing function). Since this lets you leave the volume adjustments up to the VR-1HD, it can be used in situations where there is no dedicated operator. 1.
PAGE 23
Audio Operations Playing Back Music Files Here’s how to play back the internal music files or music files (.wav) that are saved on a USB flash drive. By playing back sound effects such as jingles or applause, or background music, you can make your stream or program more enjoyable. NOTE 5 When using a USB flash drive for the first time, you must format it using the VR-1HD (p. 27). 5 Depending on the USB flash drive, recognition of the flash drive might take some time.
PAGE 24
Audio Operations Suppressing Echo in a Web Conference System (Echo Canceller) In a conversation using the speaker and mic of a web conference system, an echo can occur when the other person’s voice heard through the speaker is picked up by the mic and sent back to the other person. When you use the echo canceller function, the echo component is removed from the voice that is picked up by a mic connected to the VR-1HD, so that only your own voice is sent to the other party. 1.
PAGE 25
Live Streaming Outputting Video/Audio to a Computer for Streaming Here’s how the video and audio mixed by the VR-1HD can be output to a connected computer. You can also input audio that’s played back by the computer. By using an internet-connected computer with streaming software, you can distribute content as a live internet stream.
PAGE 26
Other Features Saving Internal Settings to a USB Flash Drive You can save the settings of this unit as a single file (.VR1) to a USB flash drive connected to the USB MEMORY port. You can use the saved settings file by loading it from the USB flash drive into this unit when necessary. NOTE 5 When using a USB flash drive for the first time, you must format it using the VR-1HD (p. 27). 5 Never turn off the power or remove the USB flash drive while the message “PROCESSING...” is shown.
PAGE 27
Other Features Formatting a USB Flash Drive Disabling Panel Operations (Panel Lock) The first time that you use a USB flash drive, you must use the VR-1HD to format it. You can disable operation of the panel’s buttons and knobs to prevent unintended operations (Panel Lock function). NOTE 5 A USB flash drive that was not formatted by the VR-1HD will not be recognized. 5 Never turn off the power or remove the USB flash drive while the message “PROCESSING...” is shown.
PAGE 28
Other Features Returning to the Factory Settings (Factory Reset) Here’s how you can return the settings of the VR-1HD to their factoryset state. If following the procedures described in this manual does not cause the result you expect, try executing a factory reset. NOTE When you execute factory reset, all previously specified content and the still image (p. 15) that was loaded into the unit will be lost. 1. [MENU] button0“SYSTEM”0select “FACTORY RESET.” A confirmation message appears.
PAGE 29
Menu List Pressing the [MENU] button makes the menu appear on the display connected to the MONITOR (MENU) connector. MEMO 5 By turning the [VALUE] knob while pressing it, you can change the value more greatly. 5 Long-pressing the [VALUE] knob returns the current menu item you’re setting to its default value. 5 When you press the [LEVEL SETUP] button, the menu for volume, input gain, solo, and mute settings appears (p. 42).
PAGE 30
Menu List VIDEO OUTPUT Menu Menu item Value (bold text: default value) Explanation OUTPUT FORMAT 720p 1080i 1080p 1024x768 1280x800 1366x768 1280x1024 1400x1050 1600x1200 1920x1080 1920x1200 Specifies the output format of the MAIN/MONITOR (MENU) connector. * When you change the setting, the change is not applied until you press the [VALUE] knob to confirm. USB FORMAT 1920x1080/29.97p (25p) 1280x720/59.94p (50p) 1280x720/29.97p (25p) 854x480/59.94p (50p) 854x480/29.
PAGE 31
Menu List SCENE Menu Menu item Value (bold text: default value) Explanation SCENE A–E (*4) Adjusts the screen layouts that are registered in scenes A–E. Specifies the type of screen layout. PinP An inset screen (a small different screen) is overlaid on the background video (picture-inpicture). SPLIT The screen is divided into left/right or upper/lower halves, and two videos are shown. INPUT 1–3 (*5) Specifies the background video. WINDOW CH INPUT 1–3 (*5) Specifies the inset screen video.
PAGE 32
Menu List TRANSITION Menu Menu item SCENE TRANSITION Value (bold text: default value) Explanation Specifies what happens when scenes are switched. * INPUT 1–3 always transition using mix. BLACK FADE A fade effect enclosing a black screen is applied. All screens switch simultaneously. MIX FADE A fade effect is applied. Screens switch individually. 0.0–1.0–5.0sec Specifies the transition time when switching between scenes or video.
PAGE 33
Menu List ON AIR Menu Menu item Value (bold text: default value) Explanation OFF COLOR BLACK, WHITE Specifies the background color (black, white) used when fading-in/out the main output video. Specifies the operation when the [ON AIR] button is pressed. AUDIO FADE OFF Only the video fades-in/out. ON The video and audio fade-in/out together. AUDIO INPUT Menu Menu item Value (bold text: default value) Explanation MIC 1, 2 Adjusts the audio that is input from the MIC 1 and 2 jacks.
PAGE 34
Menu List Menu item HPF 75Hz Value (bold text: default value) OFF, ON Explanation Turns the high-pass filter on/off. Effect Cuts off unneeded low-band audio. The cutoff frequency is 75 Hz. Press the [VALUE] knob to see a preset list for the effects (high-pass filter, equalizer). When you select a preset, the settings of each effect are overwritten. DEFAULT Flat settings that do not apply any effect. WIND NR Reduces wind noise. VIBRATION NR Reduces vibration and other low-frequency noise.
PAGE 35
Menu List USB FROM PC Adjusts the audio that is input from the USB STREAM port. DIGITAL GAIN -42.0–0.0–42.0dB Adjusts the input gain (sensitivity). LEVEL -INF–0.0–10.0dB Adjusts the input volume. MUTE OFF, ON Turns the mute function on/off. If this is “ON,” the audio is temporarily silenced. SOLO OFF, ON Turns the solo function on/off. Only the audio for which this is “ON” is heard in the headphones. * The solo function applies to the headphone output.
PAGE 36
Menu List AUDIO OUTPUT Menu Menu item Value (bold text: default value) BUS SELECT Specifies the bus that is assigned to each connector. Explanation MONITOR MAIN, AUX USB STREAM MAIN, AUX LINE OUT MAIN, AUX PHONES MAIN, AUX MAIN BUS Adjusts the audio of the MAIN bus. LEVEL -INF–0.0–10.0dB Adjusts the output volume. MUTE OFF, ON Turns the mute function on/off. If this is “ON,” the audio is temporarily silenced. If you specify “MAIN” (main bus), all input audio is mixed and output.
PAGE 37
Menu List AUDIO FOLLOWS VIDEO Menu Menu item HDMI 1–3 SW Value (bold text: default value) Explanation Turns the audio follow function on/off. Audio follow is a function that automatically switches the audio output in tandem with video switching. OFF The audio is always output regardless of the input video selection. ON The video and audio from HDMI input are switched together.
PAGE 38
Menu List AUDIO EFFECTS Menu Menu item Value (bold text: default value) Explanation EFFECTS 1–4 (*11) These settings assign functions to the AUDIO EFFECTS [1]–[4] buttons and specify details of their operation. Specifies the function that is assigned to the AUDIO EFFECTS [1]–[4] button. NONE VOICE CHANGER ASSIGN PLAYBACK (BGM/SE) REVERB No function is assigned. Turns the voice changer on/off. Effect Transforms the pitch or character of the voice that is input from the mic.
PAGE 39
Menu List Menu item Value (bold text: default value) Explanation When ASSIGN = REVERB Turns reverb on/off. You can also turn this on/off using the AUDIO EFFECTS button to which the function is assigned. OFF, ON SW Specifies the operation of the AUDIO EFFECTS button. SW MODE MOMENTARY The effect is on only while you hold down the button, and turns off when you release the button. LATCH The effect alternately turns on/off each time you press the button. LEVEL -INF– -20.0–10.
PAGE 40
Menu List USB MEMORY Menu Menu item Value (bold text: default value) Explanation LOAD SETTINGS [EXEC] Shows a list of the setting files (.VR1) that are on the USB flash drive. You can select a setting file and load the settings into the unit. The current settings are overwritten. SAVE SETTINGS [EXEC] Shows a list of the setting files (.VR1) that are on the USB flash drive. You can select a setting file and then save the current settings by overwriting them onto the selected file.
PAGE 41
Menu List SYSTEM Menu Menu item Value (bold text: default value) Explanation HDCP OFF, ON Specifies whether HDCP is enabled (ON) or disabled (OFF). When set to “ON,” copyrightprotected (HDCP) video can be input. HDCP is also added to the video that is output. * If this is “ON,” video/audio is not output from the USB STREAM port. FRAME RATE 59.94, 50Hz Specifies the frame rate. * When you change the setting, the change is not applied until you press the [VALUE] knob to confirm.
PAGE 42
Menu List LEVEL SETUP Menu Menu item Press the [LEVEL SETUP] button to access this menu. Value (bold text: default value) Explanation LEVEL SETUP (LEVEL) (1/5) Adjusts the volume. HDMI 1 -INF–0.0–10.0dB HDMI 2 -INF–0.0–10.0dB HDMI 3 -INF–0.0–10.0dB USB FROM PC -INF–0.0–10.0dB USB input PLAYBACK (BGM/SE) -INF–0.0–10.0dB Music files (p. 23) AUX BUS -INF–0.0–10.
PAGE 43
Appendices Troubleshooting If you suspect a malfunction, please check the following points. If this does not resolve the problem, contact a nearby Roland Service Center. Problem Items to check Action Page Could you be inputting copy-protected (HDCP) video? If you want to input copy-protected (HDCP) video, set the System menu “HDCP” setting to “ON.” p. 9 Video-related problems No picture is input.
PAGE 44
Appendices Video Mixer Block Block Diagram Video Mixer Block Video section HDMI 1 HDMI 1 EDID SCALER SCALER FS EDID HDMI 2 HDMI 2 EDID EDID SCALER SCALER FS FS 1 1 FS 2 CROSSPOINT 2 CROSSPOINT HDMI 3 HDMI 3 EDID EDID SCALER SCALER FS FS 3 3 USB MEMORY USB MEMORY STILL IMAGE 1/2 STILL IMAGE 1/2 BACKGROUND COLOR BACKGROUND COLOR Audio section Audio Mixer Block Audio Mixer Block MIC 1/2 MIC 1/2 SIG/PEAK SIG/PEAK ECHO HOWLING HPF GATE CANCELLER 18 HPF dB/oct CANCELLER HOWLING ECHO GAIN D.
PAGE 45
Appendices MIX MIX PinP PinP SPLIT SPLIT COLOR CORRECTOR COLOR CORRECTOR DSK DSK ON AIR FADE ON AIR FADE SCALER SCALER OSD MENU OSD MENU MONITOR MONITOR COLOR CORRECTOR COLOR CORRECTOR MAIN MAIN USB STREAM USB STREAM SCALER SCALER up to 1080/30p up to 1080/30p HDMI 3 THRU HDMI 3 THRU INPUT BUS MAIN REVERB AUX INPUT BUS LR L R M MAIN REVERB AUX LR L R M OUTPUT BUS AUX BUS SOLO MAIN OUTPUT LR L R LR MAIN AUX SOLO LR L R LR SOLO LR SOLO LR MAIN MAIN MONITOR MONITOR REVERB REVERB REVERB REVERB
PAGE 46
Appendices Main Specifications Roland VR-1HD: AV Streaming Mixer 9 Video Video Processing 4:4:4 (Y/Pb/Pr), 10-bit Input Connectors HDMI type A x 3 VIDEO INPUT 1–3 connectors * HDCP Supported. * Multi-format Supported. MAIN connector Output Connectors MONITOR connector THRU connector USB STREAM port Input Formats Output Formats HDMI type A * HDCP Supported USB B type 480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i, 1080/59.
PAGE 47
Appendices 9 Common Section Connectors USB MEMORY port (HOST) USB A type (For USB flash drive, Still image, Audio player) USB STREAM port (DEVICE) USB B type (For USB-VIDEO (USB 3.0), USB-AUDIO (USB 2.
PAGE 48
Shortcut List Operation Menu name [MENU] + AUDIO EFFECTS [1] AUDIO EFFECTS 1 [MENU] + AUDIO EFFECTS [2] AUDIO EFFECTS 2 [MENU] + AUDIO EFFECTS [3] AUDIO EFFECTS 3 [MENU] + AUDIO EFFECTS [4] AUDIO EFFECTS 4 [MENU] + [MIC 1] fader INPUT MIC 1 [MENU] + [MIC 2] fader INPUT MIC 2 [MENU] + [LINE] fader INPUT LINE [MENU] + [USB STREAM] knob AUDIO USB STREAM [MENU] + [MAIN] knob MAIN BUS [MENU] + [KEY] KEY [MENU] + [ON AIR] ON AIR [SCENE EDIT] SCENE [MENU] + SCENE [A] SCENE A [MENU] + SC