User's Manual

Compositing the Picture

You can use the touch panel to adjust the position and size of the inset screen.

1. Display the output picture on the monitor.

At [MONITOR], press the [OUTPUT] button.

2. Move the position of the inset screen.

Touch the inset screen and slide your finger over the touch panel.

fig.move-inset-screen.eps

3. Change the size of the inset screen.

While the inset screen is displayed, turn the [VALUE] dial. Turning the dial counterclockwise reduces the size, and turning the dial

clockwise expands it.

* You can expand or reduce the size rapidly by pressing in the [VALUE] dial as you turn it.

fig.inset-screen-size.eps

When the [FREEZE] button is illuminated and final output is frozen, operations using the touch panel or the [VALUE] dial have no effect. Make the

[FREEZE] button go dark to end the frozen output before such operations.

Adjusting the Position and Size of the Inset Screen