Owner`s manual

* Depending on the effects used, when mixing with different effects inserted into each
channel, or mixing channels having effects inserted with other channels having no
effects, timing shifts may occur, or you may not be able to achieve the effect you desire.
Inserting with Input and Track Channels
1. Select the channels to which the effect is to be applied. Press the SELECT
buttons for the input or track channels to which you want to apply the
effect.
The button indicators light, and the Input Mixer or Track Mixer screen appears
in the display.
2. Press [F1 (Ef1In)]. If “Ef1In” does not appear in [F1], first press [PAGE] until
“Ef1In” is displayed, then press [F1 (Ef1In)]. Alternatively, use [ ], [ ],
[ ], and [ ] to move the cursor to “EFXIns.”
3. Press [YES].
4. Use [ ], [ ], [ ], and [ ] to move the cursor. Rotate the
TIME/VALUE dial.
fig.05-04(eff1.eps)
Level
(Fader)
EQ
(2band, 3band)
EFX1
Sw
Send
Level
Pan
EFX2
Sw
Send
Level
Pan
EFX3
Sw
Send
Level
Pan
EFX4
Sw
Send
Level
Pan
AUX
Sw
Send
Level
Pan
Pan
EFX1EFX1
EFX2
EFX3
EFX4
MIX bus or REC bus
MIX bus or REC bus
MIX bus or REC bus
MIX bus or REC bus
AUX bus
Effect Insert Switch
Insert Send Level
Insert Return Level
Chapter 5 Using the Internal Effects (VS8F-2)
104