Owner`s manual

7. After you have selected the drive and partition,
press [F4 (Exec)].
8. A confirmation message appears on the screen.
Press [YES].
9. ”STORE Current?” (Store the current song?)
appears in the display. If you wish to save the cur-
rent song, press [YES]; if not, then press [NO]. If
you have selected a demo song, then press
[NO].
10. After you have switched the current drive, return
to Play condition.
11. Following the procedure described in “Saving a
Song to a Single Disk” (p. 114), make a playable
copy of the song on the Zip disk to the internal
hard disk.
12. After you have made the copy, repeat Steps 3–10
to reselect the internal hard disk as the current
drive.
When You Cannot Save a Song to a
Single Disk (Archives)
Saving to Disks (Store)
1. Make the drive (internal hard disk) containing the
song you want to copy the current drive.
2. Press [PLAY (DISPLAY)].
3. Hold down [SHIFT] and press [F1 (SONG)].
The Song menu icon appears in the display.
4. Press [F2 (AcStr)]. If “AcStr” does not appear in
[F2], first press [PAGE] until “AcStr” is displayed,
then press [F2 (AcStr)].
fig.06-10(store.eps)
Handling of Archives Copy Disks
To save songs in archives format, the destination
disk must be initialized. This initialization proce-
dure differs from the usual Drive Initialize for-
matting (p. 111). This procedure lets you carry
out Archives Copy with newly purchased disks,
disks which previously have been used with a
personal computer or other device, or other disks
which have not been formatted with Drive
Initialize. However, any song data saved to the
disk is lost once the Archives Copy procedure is
performed.
Additionally, you cannot designate a disk con-
taining archive format songs as the current drive.
If you try to do this, the disk is identified as being
an uninitialized disk.
Chapter 6 Use with a Zip Drive
117
Chapter 6