Owner`s manual

6. Songs that are marked are backed up. Use the
TIME/VALUE dial to move the cursor to the song
you want to back up and press [F3 (MARK)]. By
pressing [F2 (ALL)], you can place and remove
Marks from all of the songs. In addition, you can
press [F1 (SelSg)] to display a directory of the
songs. At this point, after you have placed a Mark
at the song you want, press [F1 (Back)].
fig.07-15(cdrbk_selsg.eps)
7. If several CD-R drives are connected to the VS-
1680, you can press [F5 (SelDr)] to display a direc-
tory of drives. At this point, use [ ], [ ],
[ ], and [ ] to select the CD-R backup desti-
nation drive, and press [F1 (Back)].
fig.07-16(cdrbk_seldr.eps)
8. Press [F4 (Exec)].
A message asking for confirmation appears in the dis-
play.
9. Press [YES].
“STORE Current?” (Store the current song?) appears
in the display.
10. If you wish to save the current song, press [YES];
if not, then press [NO]. If you have selected a
demo song, then press [NO].
11. If the song holds a large amount of data, and can-
not be contained on a single CD-R disc, the disc is
ejected, and the message “Insert Disc #” (# indi-
cates the number in the order of insertion)
appears in the display to check the total amount
of necessary discs. Insert the next CD-R disc and
press [YES]. At this time, we recommend that you
write the disc numbers on the labels so that you
can keep track of the order in which the discs
were inserted into the drive.
12. When copying over multiple CD-R discs, “Insert
Disc #” (# indicates the number in the order of
insertion) appears in the display. Insert each of
the discs once more in the proper order and press
[YES].
13. When the CD-R backup procedure is finished,
return to Play condition.
Loading Songs From CD-R Discs
1. Select the disk (internal IDE hard disk) containing
the song you want to load as the current drive.
2. Place the CD-R disc to which the song data has
been backed up in the CD-R drive.
3. Press [PLAY (DISPLAY)].
4. Hold down [SHIFT] and press [F6 (UTILITY)].
The Utility menu icon appears in the display.
5. Press [F3 (CDRRc)]. If “CDRRc” does not appear
in [F3], first press [PAGE] until “CDRRc” is dis-
played, then press [F3 (CDRRc)].
fig.07-17(cdr_rc.eps)
Chapter 7 Use with a CD-R Drive
126