Owner`s manual

1. PEAK Indicators

These indicators allow you to confirm the sound level

input at the input jacks (1–8). They help you to deter-

mine the correct input level when adjusting the

INPUT knobs. You will need to specify the level at

which the indicators light beforehand (p. 61). The indi-

cators are set at the factory to -6 dB.

2. INPUT Knobs

These knobs adjust the sensitivity of the input jacks

(1–8). Turn a knob fully to the right for mic level (-50

dBu), and fully to the left for line level (+4 dBu).

3. SELECT/CH EDIT

(Select/Channel Edit) buttons

Use these buttons when you wish to change input

mixer settings and to change input channels. The cur-

rently selected channel’s indicators are lit.

1–8: Each channel (1–8)

DIGITAL: Digital input

ST IN: Stereo in

EFFECT 1/3 RTN: Effect 1 Return

EFFECT 2/4 RTN: Effect 2 Return

When you press these buttons while holding down the

STATUS button, you can select which source to be

recorded and the channel on which that source is

recorded.

When numerics are combined with alphabetical char-

acters ([NUMERIC/ASCII]), alphabetical characters

can be input directly (Song Name, etc.).

Front and Rear Panels

Mixer Section

fig.00-03(mixer.eps)

7 8