Owner`s manual

Each of the function button works as shown below.
[F1 (LMTrk)]: This displays the track mixer level meter.
fig.12-04(tr_lvl.eps)
[F2 (LM In)]: This displays the input mixer level meter.
fig.12-05(in_lvl.eps)
[F3 (LMAux)]: This displays the EFFECT bus and AUX bus level meters.
fig.12-06(efx_lvl.eps)
[F4 (PRE)] or [F4 (POST)]: This switches the display of the meter showing
the signal level before passing through the fader
(Pre) and after being adjusted by the fader (Pst).
[F5 (F/P)] or [F5 (Meter)]: This switches between the display of the level
meter and of the pan and fader positions for
each channel.
fig.12-07(f/p_lvl.eps)
Track Channel Level Monitor Level Master Level
Input Channel Level Monitor Level Master Level
Effect Send Level Monitor LevelAUX Send Level Master Level
Track Channel
Chapter 12 Making Global Settings and Checking Conditions
181
Chapter 12