Owner`s manual

Input Mixer
Input mixer is placed before the recorder section, and correspond to the external
input sources (INPUT 1–8, DIGITAL IN L/R).
fig.01-10(inpputmix.eps)
The output of each channel is assigned to tracks to be recorded. Channels not
assigned to tracks are output directly from the MASTER jacks. Additionally, the
status of tracks with signals assigned to them when not in record standby (STA-
TUS indicator blinking red), also are output from the MASTER jacks. At this
time, the following signals are assigned to the channel faders.
Channels 1–8: INPUT jacks 1–8
DIGITAL: DIGITAL IN connector L/R
ST IN: Sources assigned to STEREO IN (p. 165)
EFFECT 1: EFX1 return level or EFX3 return level
EFFECT 2: EFX2 return level or EFX4 return level
EQ1 Fader1
EQ2 Fader2
EQ3 Fader3
EQ4 Fader4
EQ5 Fader5
EQ6 Fader6
EQ7 Fader7
EQ8 Fader8
EQ
DIGITAL
Fader
DIGITAL
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
INPUT 6
INPUT 7
INPUT 8
DIGITAL IN L/R
Input Mixer (Input channel 1–8, DIGITAL L/R)
Balance
DIGITAL
Pan1
Pan2
Pan3
Pan4
Pan5
Pan6
Pan7
Pan8
REC 1 (Recorder)
REC 2 (Recorder)
REC 3 (Recorder)
REC 4 (Recorder)
REC 5 (Recorder)
REC 6 (Recorder)
REC 7 (Recorder)
REC 8 (Recorder)
MIX L/R (MASTER)
Chapter 1 Before You Start (VS-1680 Terminology)
25
Chapter 1