Owner`s manual

4. Specify which source or track is to be output to the MIX bus. Press the
selected source input channel SELECT buttons or the track channel SELECT
buttons for the tracks you want to play back. Press [ ] and [ ] to move
the cursor. Rotate the TIME/VALUE dial to select the V-track to which you
want to playback.
fig.02-25(mix_step1.eps)
5. Press [F2 (STEP→)].
6. Only the sources or tracks assigned to the MIX bus are indicated. Press [ ],
[ ], [ ], and [ ] to move the cursor. Rotate the TIME/VALUE dial to
adjust each of the values.
fig.02-26(mix_step2.eps)
7. Press [F2 (STEP→)]. You can return to the previous screen by pressing [F1
(STEP←)].
Track assigned to the MIX bus
Source assigned to the MIX bus
Source
Track
V-Track
Cursor Pan
Level
Input Channel Track Channel
Chapter 2 Basic Operation
49
Chapter 2