Owner`s manual

8. Make the settings for the effects. Press [ ], [ ], [ ], and [ ] to

move the cursor. Rotate the TIME/VALUE dial to adjust each of the values.

Press [F3 (EFX A)] to make settings to EFFECT A (EFX1/2); press [F4 (EFX

B)] to make settings to EFFECT B (EFX3/4).

fig.02-27(rec_step3.eps)

9. Press [F2 (STEP→)]. You can return to the previous screen by pressing [F1

(STEP←)].

10. Determine whether or not the output is to be sent to the AUX bus. Press

[ ], [ ], [ ], and [ ] to move the cursor. Rotate the

TIME/VALUE dial to adjust each of the values.

fig.02-28(mix_step4.eps)

11. Press [F2 (STEP→)]. You can return to the previous screen by pressing [F1

(STEP←)].

Effect Switch

Send Level

Send Pan

Cursor

AUX Switch

AUX Send Switch

AUX Send Pan/

Balance

Cursor

Input Channel Track Channel

Chapter 2 Basic Operation