Owner`s manual

7. Press [F2 (STEP→)]. You can return to the previous screen by pressing [F1

(STEP←)].

8. Make the settings for the effects. Press [ ], [ ], [ ], and [ ] to

move the cursor. Rotate the TIME/VALUE dial to adjust each of the values.

Press [F3 (EFX A)] to make settings to EFFECT A (EFX1/2); press [F4 (EFX

B)] to make settings to EFFECT B (EFX3/4).

fig.02-33(bou_step3.eps)

9. Press [F2 (STEP→)]. You can return to the previous screen by pressing [F1

(STEP←)].

10. Determine whether or not the effects are to be recorded. First press the

SELECT button for the input channel to which you are applying the effect,

then press the track channel STATUS button for the track to which you want

the effect to be recorded. When you want to assign EFX3/4, then hold down

[SHIFT] when you press the SELECT button. You can also assign one effect

for recording on up to two tracks with the EZ Routing.

fig.02-34(bou_step4.eps)

Effect Switch

Send Level

Send Pan

Cursor

Chapter 2 Basic Operation