Owner`s manual

11. Press [F2 (STEP→)]. You can return to the previous screen by pressing [F1

(STEP←)].

12. Determine whether or not the output is to be sent to the AUX bus. Press

[ ], [ ], [ ], and [ ] to move the cursor. Rotate the

TIME/VALUE dial to adjust each of the values.

fig.02-35(mix_step5.eps)

13. Press [F2 (STEP→)]. You can return to the previous screen by pressing [F1

(STEP←)].

Track to be recorded

AUX Switch

AUX Send Level

AUX Send Pan/

Balance

Cursor

Chapter 2 Basic Operation

Chapter 2