Owner`s manual

14. Determine how the output is to be sent. Press [ ], [ ], [ ], and [ ]

to move the cursor. Rotate the TIME/VALUE dial to adjust each of the val-

ues.

fig.02-36(bou_step6.eps)

15. Press [F4 (Exec)].

A confirmation message appears in the display. Press [YES] if you want to set

the selected routing.

fig.02-24a(apply.eps)

16. Press [F3 (SAVE)].

The Routing Save screen appears in the display. Save the routing using the pro-

cedure described in Steps 5–8 of “Storing Routings as a Single List (Template)”

(p. 41).

Recalling EZ Routing

1. Press [EZ ROUTING].

The EZ Routing icon appears in the display.

2. Press [ ], [ ], [ ], and [ ]] or rotate the TIME/VALUE dial to

move the cursor to the routing you want to use.

3. Press [F4 (Exec)]. If “Exec” does not appear in [F4], first press [PAGE] until

“Exec” is displayed, and then press [F4 (Exec)].

fig.02-18(ez_con(rec).eps)

Monitor Select

Equalizer Mode

Direct Out

Effect Insert

Chapter 2 Basic Operation