Owner`s manual

* Howling could be produced depending on the location of microphones relative to speak-
ers. This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
Recording to the Tracks
1. Select a recording track. While holding down [REC], press the STATUS but-
ton for the track to which you want to record.
The button indicator blinks red.
2. Select source to be recorded to the track. While holding down the STATUS
button for the track to which you want to record, press the SELECT button
for the input channel whose source you want assigned to the track.
The button indicator blinks.
fig.03-05(select.eps)
3. Switch to the input mixer. Press [FADER] to light the IN indicator.
4. Determine the source volume. Since what is recorded is the sound after it
passes through the fader, the faders should normally be set to around 0 dB.
Chapter 3 Multi-Track Recording
61
Chapter 3
Sources Assigned to Tracks
In a newly created song, sources are assigned to tracks as shown below.
fig.03-05a