Owner`s manual

5. Press the SELECT button for the channel contain-
ing the exchange source track.
The button indicator lights.
Alternatively, press [ ], [ ], [ ], and [ ] to
move the cursor to the track you want to exchange,
and then press [F3 (MARK)] or [YES].
This exchanges the performance data on the track con-
taining the mark. When [F2 (ALL)] is pressed, you can
place or remove the marks on all the tracks simultane-
ously.
fig.04-15(tr_xch_sel.eps)
6. Press the STATUS button for the exchange destina-
tion track.
The button indicator lights red.
Rotating the TIME/VALUE dial allows you to specify
the exchange destination V-track. For example, “1-1”
indicates “Track 1, V-track 1,” and “9L-1” indicates
“Track 9 (Stereo Track 9/10, left channel), V-track 1.”
* Do not designate V-tracks that have already been specified
as exchange destinations for other Tracks.
7. Repeat Steps 5 and 6 if you want to exchange mul-
tiple tracks simultaneously.
8. Press [F4 (Exec)].
This executes Track Exchange.
9. When the exchange is completed correctly,
“Complete” appears in the display.
10. Press [PLAY (DISPLAY)].
Return to Play condition.
Inserting a Blank Space Into
Performance Data (Track Insert)
This operation inserts blank space at the speci-
fied location.
fig.04-17(tr_ins.eps)
* Do not leave sound within 0.5 seconds before or after the
area into which the data will be inserted. Any sound
which is within 0.5 seconds of the inserted data will not
be played back.
1. Hold down [SHIFT] and press [F2 (TRACK)].
2. Press [F1 (Tr/Ph)] so that Track Edit menu
appears in the display.
3. Press [F5 (Ins)]. If “Ins” does not appear in [F5],
first press [PAGE] until “Ins” is displayed, and
then press [F5 (Ins)].
4. Press [F1 (SelTr)].
5. Press the SELECT button for the track into which
you want to insert a blank space.
The button indicator lights red.
Alternatively, press [ ], [ ], [ ], and [ ] to
move the cursor to the track into which you want to
insert a blank space, and then press [F3 (MARK)] or
[YES].
This inserts a blank space in the performance data on
the track containing the mark. When [F2 (ALL)] is
pressed, you can place or remove the marks on all the
tracks simultaneously.
fig.04-18(tr_ins_sel)
START TO Time
Chapter 4 Editing a Recorded Performance (Track Editing)
87
Chapter 4