User`s manual

Fully Utilize the Media Heating System
4
Part of Practice
100
Making the Temperature Setting for the Media Heating System
Procedure

Press

Press several times to display the left gure.
Press
.

Press to select [PRINT] (print heater) or
[DRYER]
Press
.

Press to select a temperature.
You can set to “OFF." When set to "OFF," the media heating system does
not operate at all.
Press to enable the setting.

Press to go back to the original screen.
FUNCTION
HEATER CONFIG
HEATER CONFIG
DRYER 34 C
DRYER
35 C OFF
PRINT HEATER: General Guide for Setting Temperature
You use this mainly to improve ink adhesion and inhibit smudging.
If the ink forms lumps or smudges, raise the temperature. Note, however, that a temperature that is
too high may degrade the media or cause it to wrinkle.
DRYER: General Guide for Setting Temperature
When ink drying is poor, raise the temperature. Note, however, that a temperature that is too high
may degrade the media or cause it to wrinkle.
W1200mm
SETUP SHEET
Current preset
temperature
Current temperature
of the dryer
100