User`s manual

Fully Utilize the Media Heating System
4
Part of Practice
102
Control of Media Heating System during Preheating
Note: Preheating: State that the main power and the sub power are switched on and is not lighted
(state that media setup is not completed)
Procedure

Press .

Press several times to display the left gure.
Press
, and then .

Press .

Press to select setting.
MENU: The system performs heating to the preset tempera-
ture at all times, without lowering the temperature during
preheating.
30 degrees: The system keeps 30 degrees during preheat-
ing.
OFF: The system switches the media heating system off dur-
ing preheating.
Press
to enable the setting.

Press to go back to the original screen.
Default Setting
[PREHEATING]: 30 degrees
Drying the Trailing Edge of the Printing Area on the Dryer
Procedure

Press .

Press several times to display the left gure.
Press
twice.

Press to select “ENABLE.”
Press
to enable the setting.

Press to go back to the original screen.
MENU
HEATER MENU
HEATER MENU
PREHEATING
PREHEATING
30 C MENU
W1200mm
SETUP SHEET
MENU
HEATER MENU
FEED FOR DRY
DISABLE
ENABLE
W1200mm
SETUP SHEET
102