User`s manual

Fully Utilizing the Correction Function
4
Part of Practice
105
Correcting for Misalignment in Bidirectional Printing More Precisely
When further correction is required, such as when adjustment made using [SIMPLE SETTING] does not enhance
printing, use [DETAIL SETTING] to make corrections.
For information on operations, refer to p. 44 “Performing the Initial Adjustment (Correcting for Misalignment
in Bidirectional Printing More Precisely)”
Alleviating Horizontal Bands and the Like (feed correction function)
Procedure

When the roll media is used, check that no sagging is found on the media.

Press .

Press several times to display the left gure.
Press
.

Press .
A test pattern is printed.
When printing is completed, press in this
order.

Press to select a correction value.
Press
to enable the setting.

Press to go back to the original screen.
MENU
CALIBRATION
CALIBRATION
TEST PRINT
SETTING
-0.40%0.00%
To decide a Correction Value
Select the value to make the upper/lower rectangular gap and overlap smallest.
Gap present Overlap
Current correction value
Gap and overlap are smallest.