User`s manual

Accommodating to the Types and Condition of Media
4
Part of Practice
109
Description
You use this when ink dries poorly even when the media heating system is used. You can also make this setting
on the RIP software computer. When you have made the setting on the computer, the computer's setting is
used and the printer's setting is ignored.
Default Setting
[SCAN INTERVAL]: OFF
Using the Media Easy to be Winkled/Hard to be Fed
Procedure

Press .

Press several times to display the left gure.
Press
.
Press
twice.

Press .

Press to select a value.
0 to 100%
A larger value produces a larger suction force. For the media easy to be
loose due to warping or winkling, increase of the suction force may help
correct the problem. When the media is imsy and cannot move smoothly,
reduction of the suction force may correct such the problem.
AUTO
The suction force is automatically adjusted to the optimal level for the
media width.
Press to enable the setting.

Press to go back to the original screen.
Description
The platen uses suction to grip the media and keep it stable. The suction force can be adjusted corresponding
to the mature and condition of the media.
You can also make this setting on the RIP software computer. When you have made the setting on the com-
puter, the computer's setting is used and the printer's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO
MENU
SUB MENU
SUB MENU
VACUUM POWER
VACUUM POWER
90%AUTO
W1200mm
SETUP SHEET