User`s manual
Fully Utilizing Cutting Function
4
Part of
Practice
118
Performing Distance Correction During Cutting
*When you’re performing printing followed by cutting, be sure to set the correction value to “0.00%.” Otherwise
the printing and cutting positions may become misaligned
Procedure
Press .
Press to display the left gure.
Press
.
Press
twice.
Press .
Press .
Press
to select a correction value.
Set the correction value of media feed direction.
Press to enable the setting.
Press
, and then .
Press .
Press
to select a correction value.
Set the correction value of head movement direction.
Press to enable the setting.
Press to go back to the original screen.
Description
The movement distance of the media changes subtly depending on the media's thickness. This means that
the length of a line when cut may dier from the length setting in the data. You enter a correction value when
you want to align the lengths
Default Setting
[FEED SETTING]: 0.00%
[SCAN SETTING]: 0.00%
MENU
CUTTING MENU
CUTTING MENU
CALIBRATION
CALIBRATION
FEED SETTING
FEED SETTING
0.00% 0.00%
CALIBRATION
SCAN SETTING
SCAN SETTING
0.00% 0.00%
W1200mm
SETUP SHEET