User`s manual

Fully Utilizing Cutting Function
4
Part of Practice
121
Description
You perform this when printing followed immediately by cutting yields positioning for printing and cutting
that is slightly misaligned. You print alignment marks, perform detection of the printed marks, and correct the
discrepancy. Subtle misalignment between the printing and cutting positions may occur due to the thickness
of the media or the head height. We recommend making correction to match the media you're using.
Default Setting
[F] (correction value of media feed direction): 0.00mm
[S] (correction value of head movement direction): 0.00mm
Prioritize The Settings of This Machine to The Settings of a Computer Side
Procedure

Press .

Press to display the left gure.
Press
.
Press
twice.

Press .

Press to select “MENU.”
Press
to enable the setting.

Press to go back to the original screen.
Description
You can also make the settings for the cutting conditions using the computer. By default, the settings made
with the computer take priority. To make the cutting conditions set on the machine take priority, either turn
o the settings of the computer or make the setting described above.
Default Setting
[CUTTING PRIOR]: COMMAND
MENU
CUTTING MENU
CUTTING MENU
CUTTING PRIOR
CUTTING PRIOR
COMMAND MENU
W1200mm
SETUP SHEET