User`s manual

153

FAQ

Print Head Stops Moving. Why?

If the print-head carriage stops over the platen, take action immediately to prevent the heads

from drying out.

What to Do First

Switch the sub power off, then back on

again.

If the media is jammed, then also remove

the media.

If the print-head carriage move to the stand-

by position (inside the side cover), it means

the operation has ended successfully.

If The Heads Still Do Not Move

Try switching o the main power, then again switching on the main power, followed by the sub power.

If the Heads Still Do Not Move

If the heads still do not move, carry out the following emergency response measure, then contact your au-

thorized Roland DG Corp. dealer.

Procedure



Switch off the main power and open the front cover.



Remove the Cover R. Detach the side

cover.

Screw

Cover R

Hook