User`s manual

Basic

Operation

Switch On!

WARNING

When output is not being performed, remove any loaded media or switch

off the sub power.

The continued application of heat at a single location may cause the release

of toxic gases from the media or pose a re hazard.

Procedure



Close the front cover.



Turn on the main power switch.



Press the sub power button.

Note: For installation of the ink cartridge and selec-

tion of the language displayed on the display screen,

refer to Setup Guide.

The Power-saving Feature (Sleep Mode)

This machine is provided with a power-saving feature that switches to a low-power "sleep mode" when a

xed interval passes with no operation. The factory default for the time after which the machine switches to

the sleep mode is 30 minutes. When the machine is in the sleep mode, the sub power switch ashes slowly.

Using the operation panel or performing operations such as sending output data from the computer (when

media is loaded) restores the machine to its normal mode.

This setting of sleep mode can be changed. However, we recommend leaving the power-saving feature on

and setting the activation time for the sleep mode to 30 minutes or less to reduce power consumption and

prevent problems such as overheating.

 P. 138, "Setting the Interval until Activation of the Sleep Mode (Power Saving Function)," p. 139, "Deactivating the

Sleep Mode (Power Saving Function)"

Main power switch

Sub power switch

Front cover