User`s manual

Loading Media
2
Basic Operation
39

Place the left and right pinch rollers (afxed with blue stickers) on both edges of the
media.
Place them on the positions from the media edges by about 10 mm respectively.

Place the pinch rolls over all the grid rollers covered by the media.
The grit patterns can be found at the place where grit rollers are located. Be sure to remove the remain-
ing middle pinch rollers.
If you want to readjust the media position at this step, go back to the procedure 1 and redo the procedure
1.
 . Printing quality is a󰮏ected due to skew media feed, if you hold the media only to readjust the position
forcibly.
Attaching and Detaching Middle Pinch Rollers
Attachment/
De t a c h m e n t
Location
About 10 mm
Left side
pinch rollers
(Blue sticker)
About 10 mm
Right side pinch
rollers
(Blue sticker)
Grit patterns
Grit rollers
(It places under media.)
Middle pinch
roller
To attach
Inset all the way and
slide along the rail.
To detach
Pull back and out.