User`s manual

Loading Media
43

Lower the loading lever to secure the media in place.
starts to ash, and then the screen shown in the gure appears.
When you’re performing cutting only, never use the media clamps.
 P. 59, "Important Note on Cutting"

Move the left and right media clamps above the edges of the media.
Line up the edges of the media with the centers of the holes of the media clamps.

Close the front cover.
When the front cover is closed, the print-head carriage moves and detects the width of media. This opera-
tion is called initialization. When initialization ends,
remains steadily lighted, and the printable
width is displayed on the screen. This completes loading of the media.
2
Basic Operation