User`s manual

Basic

Operation

Switch Off

WARNING

When output is not being performed, remove any loaded media or switch

off the sub power.

The continued application of heat at a single location may cause the release

of toxic gases from the media or pose a re hazard.

Procedure



Switch off the sub power whenever output

is nished.

Hold down the sub power button for one second

or longer.



Raise the loading lever.

Even except for switching o the power, raise the

loading lever.

Leave the main power switched on at all times.

Never switch o the main power. By switching on the main power, the automatic maintenance function

is carried out periodically. If the automatic maintenance is not carried out, it may result in breakdown

of this machine such as breakdown of the print head.

Never switch off the main power or unplug the power cord suddenly while operation is

in progress.

Switching o the main power or unplugging the power cord suddenly while operation in progress

may damage the print head. Be sure to rst switch o the sub power.

If the main power is accidentally switched o, immediately turn the power back on.