User`s manual

84
3
Maintenance
Replacing Consumable Parts
Replacing the Wiper
The wiper is a component that you use when cleaning the print head. When the screen displays a message
like the one shown, it means the item needs to be replaced. Replace with new items.
Regarding the purchase of the wiper, contact your authorized Roland DG Corp. dealer.
CAUTION
Be sure to perform operations as specied by the following instructions,
and never touch any area not specied in the instructions.
Sudden movement of the machine may cause injury.
1. Display the [REPLACE WIPER] menu.

When the message shown in the gure appears, press .

Remove any media from the platen.

Press .

Press several times until the screen shown on the left
appears.
Press
, and then .

Press , and then .

Press .
The print-head carriage moves to a location where wiper replacement is
possible, and then the screen shown in the gure appears.

Remove the cover R.
TIME FOR
WIPER REPLACE
TIME FOR
WIPER REPLACE
MENU
SUB MENU
SUB MENU
MAINTENANCE
MAINTENANCE
REPLACE WIPER
OPEN COVER R
Screw
Cover R
Hook