User`s manual

Fully Utilizing Preset Function

Part of

Practice

[PRINT] (Print heater), [DRYER]  P. 100, "Making the Temperature Setting for the

Media Heating System"

[PREHEATING]  P. 102, "Control of Media Heating System during

Preheating"

[DRYING TIME]  P. 103, "Setting the Drying Time after Printing"

[ADJUST BI-DIR SIMPLE SETTING]  P. 104, "Correcting for Misalignment in Bidirec-

tional Printing"

[ADJUST BI-DIR DETAIL SETTING]  P. 105, "Correcting for Misalignment in Bidirec-

tional Printing More Precisely"

[CALIBRATION]  P. 105, "Alleviating Horizontal Bands and the Like

(feed correction function)"

[EDGE DETECTION]  P. 108, "Using Transparent Media"

[SCAN INTERVAL]  P. 108, "Printing Hard-to-dry Media"

[VACUUM POWER]  P. 109, "Using the Media Easy to be Winkled/

Hard to be Fed"

[FULL WIDTH S]  P. 110, "Speeding Up Output for Narrow Me-

dia"

[FEED FOR DRY]  P. 102, "Drying the Trailing Edge of the Printing

Area on the Dryer"

[FORCE], [SPEED], [OFFSET], [UP-SPEED]  P. 115, "Fine-tuning the Cutting Conditions"

[CALIBRATION] (in the [CUTTING MENU])  P. 118, "Performing Distance Correction During

Cutting"

[PRINT-CUT ADJ.]  P. 119, "Correcting Misalignment of the Printing

and Cutting Positions"

[CROP-CUT ADJ.]  P. 128, "Correcting Misalignment for Printing

and Cutting When Using Crop Marks"

 P. 98, "Loading a Saved Preset"