User Manual
In Song View the Instruments are arranged in 4 rows from top to bottom
starting with one Multi Instrument on top and three Solo Instruments below.
There are 12 available loop slots per instrument. On the iPad you can see all 12
loop slots on one screen.
On the iPhone you can view 4 loop slots per page and use the slot selection
icon ( )
at the bottom of the screen to navigate to the corresponding page.
5.5 Playing a Loop
While in the Song View there are several pre-recorded loops in NOISE for you
to experiment with. Touch the top left loop. You will hear a groove begin to
play which will repeat every four bars until you touch another loop in the same
instrument, and then the second loop will begin playing when the first reaches
the end of four bars. You can do this for all four of the instruments
simultaneously. Each instrument can play one loop at a time.
Loops can also be started by pressing the buttonand then touching the
specific loop or loops you wish start playback on. You can experiment with
combinations of different loops playing back together.
5.6 Creating a New Project
You can begin recording over the existing project or you can create a new one.
To create a new one, press the arrow at the top left of the Song View. This will
take you to NOISE.fm. Touch the “Create New project” icon to create a new