User Manual
project. Enter a name for the project and touch “OK”. You now have a new
empty project that you can use to record your own loops.
5.7 Recording Loops
From the Instrument View select the Multi Instrument icon at the bottom
of the screen. Now use the arrows on either side of the Multi Instrument preset
name to select “Dance Groove Kit”. Strike and hold different combinations of
pads until you find a combination that produces a groove that you would like
to record.
Record A Beat
Swipe down from the top of the screen to the Song View and select
the top left empty loop slot. This will allow you to record a beat to start
with. Swipe up from the bottom of the screen to go back to the
Instrument view. Touch the Record button and a 1 bar count-in
will begin playing. At the end of the count-in begin playing your
groove for 4 bars. The pattern you just created will continue to loop.
Swipe down to the Song View and press the Play/Pausebutton to
stop.
Record A Bassline
Swipe back up to instrument view and select the first Solo Instrument
. Use the preset arrows to select “Classic Acid Bass”. Grab the ( )
icon and swipe twice to the left to access Scale, Chord, and Arp. For a
quick and easy bass line set the Scale to “Major” and set the Hide