User Manual

Power / Bluetooth Button
The power button is located on the front panel of the Lightpad Block. Press this
button to turn it on, press and hold for approximately 3 seconds to turn the
Lightpad Block off. While on, pressing this button repeatedly toggles between
Bluetooth pairing mode on and off.
The Lightpad Surface
The Lightpad surface features a 15 x 15 LED matrix comprised of individual
cells (225) and covered with laser etched silicone which enables users to
create multidimensional or 5D Touch performances.
The Lightpad Surface is made of silicone which is purposely engineered to
withstand repetitive pressure inputs from fingers and hands while providing
passive haptic feedback to the input gestures. The surface has been specially
treated to provide soft touch and reduce surface friction for lateral gestures.
Mode Button
The Mode button is on the left side panel of the Lightpad Block and cycles the
Instruments. The secondary use for the Mode button is to cycle through the
various configurations of the 15×15 LED grid when connected to 3rd party
software applications.
DNA Connectors
The Lightpad Block features 8 DNA connectors. These six-pin connectors
magnetically connect multiple Blocks and also transmit power and data
between the Blocks.
USB-C Port