User's Manual

controlsignals.Manyexternalhardwaresynthsandthirdpartysynthpluginscanalsouse
thesetwocontrolsignalsasmodulationsources.TheXYTouchpaddefaultstotransmitthe
followingMIDICCs:

Xaxis:MIDICC113
Yaxis:MIDICC114

MIDI Mode
IndicatedbyawhiteLED

MIDIModeallowstheTouchFaderstobeassignedtoanyMIDICCsusingtheModulation
PanelinEquator.Thisallowsadditionalcustomisationofsoundparameters. 

TheTouchFadersareassignablebutdefaulttotransmitthefollowingMIDICCs:

GlideTouchFader:MIDICC107
SlideTouchFader:MIDICC109
PressTouchFader:MIDICC111

2.7 Charging the Battery
Media:wireframeimageofRISEpluggedintoUSBportofcomputer

ThebatterychargeswhentheRISEispluggedintoapowersupplieddevicethroughthe
USBcableordirectlytoapowersource.

ThePower/Modebuttonindicatesthebattery’slevelofcharge.WhenchargingtheLEDwill
bered,amber,orgreentoindicateachargestatusoflowcharge,halfcharge,orfullcharge.

WhentheRISEisnotconnectedtoapowersource,thePower/Modebutton’sLEDwillflash
continuouslytonotifyyouofthelevelofthediminishingcharge.Therapidityofredflashes
indicatesthebatterylife:

● Flashesredonceeveryfiveseconds:Batteryislowwithlessthan60minutesof
playingtimeremaining.
● Flashingredonceeverythreeseconds:Batteryislowwithlessthan40minutesof
playingtimeremaining.
● Flashingredonceeverytwoseconds:Batteryisverylowwithlessthan20minutes
ofplayingtimeremaining.
● Threerapidredflashes:RISEispreparingtoshutoff.

Chargetimesareasfollows:

USBconnectedandRISEswitchedon:7hourstofullcharge.
USBconnectedandRISEswitchedoff:5.5hourstofullcharge.