User's Manual

ExternalDCsupply,RISEonoroff:3hourstofullcharge.

Protectingthebattery:

IfyouanticipatenotusingyourRISEforthreemonthsorlonger,werecommendthatyou
takethefollowingstepstoensureitsfunctionality:
● Keepitfullychargedwhennotinuse.
● Storeitinanenvironmentwithlowhumidityandatemperaturebetween1025℃.
● Keepitawayfromcorrosivegas.

Theprotectthehealthofthelithiumpolymerbattery,werecommendyouchargeyourRISE
everysixmonthsattheminimum.

2.8 DC Connection and Charging an External Device
ConnectingtheRISEdirectlytoapowersourcethroughanexternalmainspowersupply
chargesthebatteryaswellasanydevicethatisattachedtotheRISE’sUSB“A”port.
Connectingdirectlytoapowersourcewillchargethebatteryfaster(takingapproximately
threehours)thanifyouchargethroughaUSBconnectiontoapowersupplieddevice.The
RISEcomeswithaUSBcable,butitdoesnotincludeanexternalmainspowersupply.
Pleaserefertothespecificationsbelowbeforepurchasingone.


RequirementsforDCpowerinput:
Outsidediameter:4mm
Internaldiameter:1.7mm
Shaftlength:11mm
Inputvoltageforexternalpowersupply:100240VAC
Outputvoltageforexternalpowersupply:912VDC24Wcentrepinpositive

USBAoutput:
Outputvoltage:DC5V
Outputcurrent:2.1Amax.
