User manual

UserManualofNetworkCamera
10

Figure2‐3 iVMS‐4200Interface
2.2 SettingtheNetworkCameraovertheWAN
Purpose:
ThissectionexplainshowtoconnectthenetworkcameratotheWANwithastaticIP
oradynamicIP.
2.2.1 StaticIPConnection
Beforeyoustart:
Please apply a static IP from an ISP (Internet Service Provider). With the static IP
address,youcanconnectthe networkcameraviaarouterorconnectittotheWAN
directly.
 Connectingthenetworkcameraviaarouter
Steps:
1. Connectthenetworkcameratotherouter.
2. AssignaLANIPaddress,thesubnetmaskandthegateway .RefertoSection2.1.2
Detectingand Changing the IP Address for detailed IP address configuration of
thecamera.
3. SavethestaticIPintherouter.
4. Setportmapping,e.g.,80,8000,8200and554ports.Thestepsforportmapping
vary depending on different routers. Please call the router manufacturer for