User manual

UserManualofNetworkCamera
11
assistancewithportmapping.

RefertoAppendix2fordetailedinformationaboutportmapping.
5. Visitthenetworkcamerathroughawebbrowserortheclientsoftwareoverthe
internet.

Figure2‐4 AccessingtheCamerathroughRouterwithStaticIP
 ConnectingthenetworkcamerawithstaticIPdirectly
Youcan also save the static IP in the camera and directlyconnect it to the internet
withoutusingarouter.RefertoSection2.1.2DetectingandChangingtheIPAddress
fordetailedIPaddressconfigurationofthecamera.

Figure2‐5 AccessingtheCamerawithStaticIPDirectly
2.2.2 DynamicIPConnection
Beforeyoustart:
Pleaseapplyadynamic IPfromanISP.WiththedynamicIPaddress,youcanconnect
thenetworkcameratoamodemorarouter.
 Connectingthenetworkcameraviaarouter
Steps:
1. Connectthenetworkcameratotherouter.
2. Inthecamera,assignaLANIPaddress,thesubnetmaskandthegateway .Refer
to Section 2.1.2 Detecting and Changing the IP Address for detailed LAN
configuration.
3. Intherouter,setthePPPoEusername,passwordandconfirmthepassword.
4. Setportmapping.E.g.80,8000,8200and554ports.Thestepsforportmapping
vary depending on different routers. Please call the router manufacturer for
assistancewithportmapping.

RefertoAppendix2fordetailedinformationaboutportmapping.
5. Applyadomainnamefromadomainnameprovider.
6. ConfiguretheDDNSsettingsinthesettinginterfaceoftherouter.