User manual

UserManualofNetworkCamera
36
With the  function enabled, you don’t need to configure the port mapping for each
port,andthecameraisconnectedtotheWideAreaNetworkviatherouter.
Steps:
1. EntertheUPnP™settingsinterface.
Configuration>AdvancedConfiguration>Network>UPnP
2. CheckthecheckboxtoenabletheUPnP™function.
Thenameofthedevicewhendetectedonlinecanbeedited.

Figure5‐17 ConfigureUPnPSettings
Toportmappingwiththedefaultportnumbers:
Choose 
Toportmappingwiththecustomizedportnumbers:
Choose

Andyoucancustomizethevalueoftheportnumberbyyourself.

Figure5‐18 ModifyPortNo.
3. Click  tosavethesettings.
5.4 ConfiguringVideoandAudioSettings
5.4.1 ConfiguringVideoSettings
Steps: