User manual

UserManualofNetworkCamera
46
3. SettheAlarmActionsforMotionDetection.
Purpose:
You can specify the linkage method when an event occurs. The following
contentsareabouthowtoconfigurethedifferenttypesoflinkagemethod.

Figure5‐30 LinkageMethod
Steps:
(1) Checkthecheckboxtoselectthelinkagemethod.Audiblewarning,notify
surveillancecenter,sendemail,uploadtoFTP,triggerchannelandtrigger
alarmoutputareselectable(Optional).
 AudibleWarning
Triggertheaudiblewarninglocally.
 NotifySurveillanceCenter
Sendanexceptionoralarmsignaltoremotemanagementsoftwarewhen
aneventoccurs.
 SendEmail
Send an email with alarm information to a user or users when an event
occurs.

TosendtheEmailwhenaneventoccurs,youneedtorefertoSection5.6.6toset
therelatedparameters.
 UploadtoFTP
Capturetheimagewhenanalarmistriggeredanduploadthepicturetoa
FTPserver.

SettheFTPaddressandtheremoteFTPserverfirst.RefertoSection5.3.8for
detailedinformation.
 TriggerChannel
Thevideowillberecordedwhenthemotionisdetected.Youhavetosetthe
recording schedule to realize this function. Please refer to Section 6.2 for
detailedinformation.
 TriggerAlarmOutput
Triggeroneormoreexternalalarmoutputswhenaneventoccurs.