User manual

UserManualofNetworkCamera
49
toStep3SettheAlarmActionsforMotionDetectioninSection5.6.1.
5. YoucanalsochoosethePTZlinkingforthealarminput ifyourcameraisinstalled
with a pan/tilt unit. Check the relative checkbox and select the No. to enable
PresetCalling,PatrolCallingorPatternCalling.
6. Youcancopyyoursettingstootheralarminputs.
7. Click  tosavethesettings.

Figure5‐33 LinkageMethod
5.6.4 ConfiguringAlarmOutput
Steps:
1. EntertheAlarmOutputSettingsinterface:
Configuration>AdvancedConfiguration>Events>AlarmOutput
2. SelectonealarmoutputchannelintheAlarmOutputdrop‐downlist.Youcan
alsosetanameforthealarmoutput(optional).
3. TheDelaytimecanbesetto5sec,10sec,30sec,1min,2min,5min,10minor
Manual.Thedelaytimereferstothetimedurationthatthealarmoutputremainsin
effectafteralarmoccurs.
4. Click  toentertheEditScheduleTimeinterface.Thetimeschedule
configurationisthesameasthesettingsofthearmingscheduleformotiondetection
RefertoStep2SettheArmingScheduleforMotionDetectioninSection5.6.1.
5. Youcancopythesettingstootheralarmoutputs.
6. Click  tosavethesettings.