User manual

UserManualofNetworkCamera
55
typeandpropertyofthedisk.

Figure6‐2 InitializeDisk
(2) IfthestatusofthediskisUninitialized,checkthecorrespondingcheckboxto
selectthediskandclick  tostartinitializingthedisk.

Figure6‐3 Initializing
Whentheinitializationcompleted,thestatusofdiskwillbecomeNormal.

Figure6‐4 ViewDiskStatus

 Upto8NASdiskscanbeconnectedtothecamera.
 ToinitializeandusetheSDcardafterinsertittothecamera,pleaserefertothestepsof
NASdiskinitialization. 
6.2 ConfiguringRecordingSchedule
Purpose:
Thereare twokinds  of recording for the cameras: manual recording and scheduled
recording. For the manual recording, refer to Section 4.3 Recording and Capturing
Pictures Manually. In this section, you can follow the instructions to configure the
scheduledrecording.Bydefault,therecordfilesofscheduledrecordingarestoredin
theSDcard(ifsupported)orinthenetworkdisk.
Steps:
1. EntertheRecordScheduleSettingsinterface:
Configuration>AdvancedConfiguration>Storage>RecordSchedule