User manual

UserManualofNetworkCamera
69
cameraduringtheprocess.Thecamerarebootsautomaticallyafterupgrading.

Figure9‐13 RemoteUpgrade
9.7 RS‐232Settings
Purpose:
TheRS‐232portcanbeusedintwoways:
 ParametersConfiguration:Connectacomputertothecamerathroughtheserial
port. Device parameters can be configured by using software such as
HyperTerminal. The serial port parameters must be the same as the serial port
parametersofthecamera.
 Transparent Channel: Connect a serial device directly to the camera. The serial
devicewillbecontrolledremotelybythecomputerthroughthenetwork.
Steps:
1. EnterRS‐232PortSettinginterface:
Configuration>AdvancedConfiguration>System>RS232

Figure9‐14 RS‐232Settings

IfyouwanttoconnectthecamerabytheRS‐232port,theparametersoftheRS‐232should
beexactlythesamewiththeparametersyouconfiguredhere.
2. Click  tosavethesettings.