User manual

UserManualofNetworkCamera
20
4.3 RecordingandCapturingPicturesManually
Intheliveviewinterface,click  onthetoolbartocapturethelivepicturesorclick
 torecordthelivevideo.Thesavingpathsofthecapturedpicturesandclipscan
be set on the Configuration > Local Configuration page. To configure remote
scheduledrecording,pleaserefertoSection6.2.

ThecapturedimagewillbesavedasaJPEGfileinyourcomputer.
4.4 OperatingPTZControl
Purpose:
In the  live view interface, you can use the PTZ control buttons to realize
pan/tilt/zoomcontrolofthecamera.
Beforeyoustart:
To realize PTZ control, the camera connected to the network must support the PTZ
functionora pan/tilt unithas beeninstalledtothe camera. Please properly setthe
PTZparametersonRS‐485SettingspagereferringtoSection10.6RS‐485Settings.
4.4.1 PTZControlPanel
On the live view page, click  to show the PTZ control panel or click  to
hideit.
Clickthedirectionbuttonstocontrolthepan/tiltmovements.

Figure4‐3 PTZControlPanel

Clickthezoom/iris/focusbuttonstorealizelenscontrol.